The trouble with a lot of storage is the assumption that everything fits into a carton or onto a pallet. So if you’re trying to store anything bigger than 48” x 40”, it can feel like forcing a round peg into a square hole. That’s where cantilever racking can be a real game changer.
This specialized racking is the perfect solution for most products that are just too big to fit traditional pallets. Whether you need heavy-duty sheet metal racks or outdoor pipe storage racks or furniture storage, cantilever racking might be the solution you’re looking for. Read on to learn more about cantilever racking and how to add it to your facility.
Cantilever racking is a highly versatile racking system that efficiently stores bulky, non-palletized product. It’s a series of rear-mounted uprights that support arms where material, like sheet metal or long pipes, can be stored without having to fit between front-mounted uprights.
This racking system is made up of 4 different components which interact to create a durable storage solution for your oversized goods.
For certain applications, cantilever racking offers distinct advantages over traditional pallet racking.
By description, cantilever racking and pallet racking might sound similar. However, several key differences between the two allow each to fit unique functions within a warehouse.
Generally, cantilever racking stores non-palletized products such as long pipes, sheet metal, and lumber. Additionally, the spacing between uprights is often wider than a standard pallet. Decking can be added to cantilever arms, allowing them to support pallets. However, this is typically an inefficient use of space and generally not recommended.
To support a pallet, pallet racks use 4 uprights. One supports each corner of the pallet. Cantilever racks support their loads with as little as 2 uprights. Both of these uprights are positioned at the back of the racking. This allows long goods to be loaded and unloaded without colliding with front-mounted uprights.
Heavy-duty cantilever racks are built with heavy-gauge steel. This increases the cost of this type of racking, making it more expensive than traditional pallet racking.
Cantilever rack capacity depends on equal distribution of weight between the arms. Each arm is rated by the manufacturer to support an approximate weight. For example, standard 48x4 arms are typically rated for 2,000 lbs. So if your load weighs 6,000 lbs, you’ll need at least 3 arms to support it.
Likewise, cantilever uprights are also rated to a maximum weight. This weight rating references the total weight support by each arm attached to the upright. Thus, the total each arm can actually support will be affected by the number of arms on the upright.
For example, let's say you have an upright rated for 10,000 lbs, and you're using the same 48x4 arms mentioned above. That means for a single-sided cantilever rack with 5 arms, each arm can support close to its rated load of 2,000 lbs. However, if your rack is double-sided, you now have 10 arms on that upright. This means that each arm can only support 1,000 lbs, despite their 2,000 lbs rating.
Other factors can influence cantilever rack capacity. Arm type, for example, affects these calculations. Structural arms will support a little more than their rated capacity, but roll-formed might support a little less than their rating. Similarly, bracing between uprights can increase the total load rating of each upright in the rack.
Cantilever racking uprights are installed based on the product they're intended to hold. Uprights are spaced so arms support loaded materials evenly without allowing the product to sag in the middle.
Product will hang over the outside arms laterally but should not hang out on either end more than half the distance between uprights. For example, if there is 4 feet between your uprights, the loaded product should not hang more than 2 feet over the outside arms.
Cantilever racking can be installed in two configurations: single-sided and double-sided. Single-sided cantilever racking only has arms on one side of the upright. This configuration is best suited for installation against a wall or similar barrier. Double-sided racking has arms on either side of each upright. This is best for in-aisle use.
Due to the size of products stored on cantilever racks, aisle width is usually wider than aisles between traditional pallet racks. This is to ensure forklifts have room to maneuver with long loads. The use of specialized forklifts like a COMBiLift can reduce the required width of aisles.
If your warehouse stores long, oversized, or bulky products, cantilever racking might be the perfect choice for your storage needs. However, these are not a one-size-fits-all solution. Each type of racking excels at a particular kind of storage. So let us help you find the right integrated storage solution for your facility. Our warehouse solutions team has the expertise you need to get the most out of your storage space. To learn more or set up your consultation, contact us online or visit one of our Mid-South locations:
Arkansas - Jonesboro
Alabama - Birmingham, Dothan, Irondale, Madison, Mobile, and Montgomery
Mississippi - Tupelo and Richland
Tennessee - Jackson, Memphis, Knoxville, and Kingsport
Further Reading
8 Expensive Warehouse Design Mistakes
Different Types of Pallet Racking
5 Things A COMBiLift Can Do That Other Forklifts Can’t